PRODUCT DESCRIPTION

  One piece washer/sealant design

  Seals fastener assemblies

  Locks out moisture, liquids, vapors and pressurized air

  Dampens noise and vibration

  Tested extensively by certified independent laboratories

  Withstands 12,000 lbs psi hydrostatic pressure

PERFORMANCE ADVANTAGE

  Time proven design

  Dome-shaped profile

  Uniform contact ensured when fastener tightens down on washer

  Applying torque creates a three-way tensioning effect to guarantee a

     360 impervious seal around the fastener assembly

WASHER MATERIAL

  Standard in 304 or 316 series stainless steel

WASHER SEALANT

  Patented, thermosetting plastisol sealing material

  Stable non-aging

  Provides a wide range of working temperatures (-60 °F to +275 °F)

  Chemically resistant to water, gasoline, petroleum oils, salt sprays,

      alkalis, acids, organic and aromatic solvents, detergents, ozone,

      hydrocarbons, oxygenated and chlorinated solvents

     UPWARD

to seal between the underside of the fastener and the washer hole

        OUTWARD

to seal the space between the contoured underside of the washer and the surface of the fastened material

        DOWNWARD

to seal the space between the clearance hole and the threads of the fastener